Brians Machine Shop and Derby Parts
- 1740 Keltner Rd., Columbia, Kentucky, United States (US)
- 2703781887
-
BMS 1/2″ Lower SBC Cradle
$480.00 Brains Machine Shop Lower SBC Cradle. Small Block Chevy built with 1/2" thick steel material. Comes complete with Pulley Protector.ADD TO CART -
BMS 1/2″ SBC Headplate w/Half Halo
$1,000.00 Designed specifically for demo derby applications, this headplate and cradle combo is built to withstand the brutal impacts and intense conditions of the derby trackADD TO CART -
BMS 1/8″ Camry Rail Plates
$110.00 1/8" mild steel camry inner front plates (pair)ADD TO CART -
BMS 1/8″ Radiator Guard
$100.00 1/8" steel radiator guardADD TO CART -
BMS 10 Gal. Stainless tank
$367.50 10 gallon stainless fuel cell with baffle 14x14x12 Mid mount 1/4 inch inlet and ventADD TO CART -
BMS 10/12 Bolt Axle Savers
$210.00 Brians Machine Shop 10/12 Bolt Axle Savers – Demolition Derby (Pair) Protect your axle housings and stay in the derby longer with the Brians Machine Shop (BMS) 10/12 Bolt Axle Savers. Designed for the punishing impacts of demolition derby, these axle savers provide heavy-duty protection for your axles, helping to prevent costly damage during fierce competition.ADD TO CART -
BMS 10/12 Bolt Rearend Brace
$160.00 built from 1/4" thick steel to withstand the punishing impacts and stress of competitive derby racing. The BMS rearend brace ensures that your rear axle stays in placeADD TO CART -
BMS 13″ Complete Tie Rods
$250.00 demo derby tie rods complete setADD TO CART -
BMS 13″ Tie Rod Tubes
$125.00 tie rod tubes are manufactured from solid steel to handle hard hits, heavy steering loads, and repeated abuse without bending or breaking.ADD TO CART -
BMS 14 Bolt Axle Savers
$210.00 Brians Machine Shop BMS 14 Bolt Axle Savers – Demolition Derby (Pair) Maximize the durability of your axle setup with the Brians Machine Shop (BMS) 14 Bolt Axle Savers, designed specifically for demolition derby cars. These heavy-duty axle savers are built to protect your axle housings from the brutal impacts and stress of derby action, ensuring your vehicle stays in the game longer.ADD TO CART -
BMS 14″ Bead Lock Set
$280.00 14" beadlock set (will do 2 tires)ADD TO CART -
BMS 14″ Bead Locks 1/4″ two wheels
$250.00 Get your derby car ready for the toughest battles with the Brians Machine Shop BMS 14" Bead Locks 1/4"—specifically engineered for the extreme demands of Demo Derby competition. When you're pushing your vehicle to the limit, you need equipment that can handle the hits, impacts, and intense stress.ADD TO CART -
BMS 14″ Lip Ring Set (2 wheels)
$50.00 14" Lip Ring Set (2 wheels). Lip ring set will build two complete 14" wheels. 1" Wide steel ringsADD TO CART -
BMS 14” Full Wheel Plates pair
$105.00 These full wheel beatdown plates are cut from 3/16" thick steel pair two wheelsADD TO CART -
BMS 15 Gal. Tank
$420.00 15 gallon stainless with baffle ADD TO CART -
BMS 15″ Complete Tie Rods
$250.00 solid steel hex Using MOOG ES150L and ES150R endsADD TO CART -
BMS 15″ Lip Ring Set (2 wheels)
$50.00 15" Lip Ring Set (2 wheels). This Set of Lip Rings is 1" wide 1-4 inch thick. The set will build 2 complete wheels.ADD TO CART -
BMS 15″ Rear Bumper Brackets
$79.00 4 PACK - these brackets help you achieve the proper rear-bumper tilt so impacts roll up and over instead of digging in.ADD TO CART -
BMS 15″ Tie Rod Tubes
$125.00 replacement tie rod tubes (solid Hex)ADD TO CART -
BMS 15” Bead Locks 1/4″ two wheels
$250.00 15" beadlock pairADD TO CART -
BMS 15” Bead Locks 3/8″
$280.00 ADD TO CART -
BMS 15” full Wheel Plates pair
$105.00 weld the plates on your rims and beat them in to shape for a strong derby wheel. pair two wheelsADD TO CART -
BMS 2.3 Ford Cradle
$575.00 2.3 CRADLE 3/8" Thick SteelADD TO CART -
BMS 20 Gal. Tank
$472.50 stainless steel mid mount 20 gallon tankADD TO CART -
BMS 2G Rochester Air Cleaner
$50.00 complete 2g rochester air cleaner with filterADD TO CART -
BMS 3″ Offset Wheel Centers-Pair
$85.00 BMS 3" Offset Wheel Centers-PairADD TO CART -
BMS 3/8″ Headplate Cradle with Halo
$825.00 built to withstand the harshest impacts, this cradle is made from 3/8" thick steel, providing unbeatable strength and protection for your engine in the toughest derby conditions.ADD TO CART -
BMS 3/8″ SBC Engine Cradle
$388.50 Built from 3/8" thick steel, engine cradle is engineered to deliver strength and durability, ensuring your engine stays securely mounted and protected during the most intense collisions.ADD TO CART -
BMS 3/8″ SBC Headplate Cradle
$575.00 Brians Machine Shop BMS SBC Headplate Cradle – Small Block Chevy (With Pulley Protector) Protect your Small Block Chevy (SBC) engine from the punishing impacts of demolition derby with the Brians Machine Shop (BMS) SBC Headplate Cradle. Crafted from 3/8" thick steel, this rugged cradle ensures maximum engine protection, keeping your headplate securely in place and shielding critical components from damage during collisions.ADD TO CART -
BMS 30 gal stainless tank
$600.00 brians machine shop 30 gallon fuel tank, 13 ga. stainless with baffle. side mountsADD TO CART -
BMS 4 Barrel/4412 Air Cleaner
$50.00 4 barrel carburetor air cleaner with element, also fits 4412 carbsADD TO CART -
BMS 4 Cylinder Header Protector
$84.00 4 cylinder header protector with bolts. 1/4" thick steel.ADD TO CART -
BMS 4 pack 1/4″ square Hood Washers
$32.00 Brians Machine Shop 4 pack of 1/4" square Hood Washers. 5"x5" with 1inch holeADD TO CART -
BMS 4 pack Iron Cross Hood Washers
$32.00 Brians Machine Shop BMS 4 pack Iron Cross Hood Washers 1/4" thick steel washer with 1" Hole.ADD TO CART -
BMS 4 pack Punisher Hood Washers
$31.50 built to keep your hood and trunk secured when the hits start flying. Made from 1/4" thick steel and featuring an aggressive Punisher skull designADD TO CART -
BMS 4 pack Skull Hood Washers
$31.50 Cut from 1/4" thick steel, these washers are designed to spread the load, prevent pull-through, and keep your panels secured when the car starts taking hard shotsADD TO CART -
BMS 5 Gallon Tank
$290.00 built to survive the punishment of demo derby and other high-impact racing environments. Constructed from heavy-duty stainless steel, this tank delivers exceptional strength, corrosion resistance, and long-term reliability when performance matters most.ADD TO CART -
BMS 6×6 flat plates 6-PACK
$50.00 BMS 6x6 Flat Plates (6-Pack) These 6 1/4" BMS 6x6 Flat Plates are perfect for use in demolition derby cages, frames, and bumpers. Made from durable steel, they’re precision-cut for strength and reliability. Quantity: 6 plates per pack. Ideal for tough derby builds.ADD TO CART -
BMS 6×6 taco plates 6- PACK
$55.00 BMS 6x6 taco plates. Built for strength, precision, and consistency 6x6 Taco Plates feature a 4 1/4" radius bend. come in a quantity of 6ADD TO CART -
BMS 74 Replica Bumper DIY Kit
$600.00 build your own 74 replica bumper with this kitSelect options -
BMS 8 Lug Small Wheel Center 2 pack
$60.00 dual pattern 8 lug 3/8"thick pattern 1 fits 1998 and older pattern 2 fits 1999 and newerADD TO CART -
BMS 8 Pack Taco Plates
$57.75 Eight 4x4 taco plates 1/4 “ thickADD TO CART -
BMS 8-Lug Full Center Pair
$95.00 full center pair for derby wheels Choose 14" 15", Nissan or SS rimsSelect options -
BMS 8′ cable
$65.00 8' push pull standard demo derby cableADD TO CART -
BMS 9″ Axle Savers
$210.00 ford 9" axle saversADD TO CART -
BMS 9″ Rearend Brace
$160.00 Built from 1/4" thick steel, this heavy-duty brace provides the durability and support your rearend needs to survive even the most punishing impactsADD TO CART -
BMS Big Chevy/Small Ford 3/8″ Thick Small Center
$50.00 3/8" thick steel (2 pack) choose 1/2" or 5/8" studsSelect options -
BMS Bird Hood Washers (4 Pack)
$38.00 ADD TO CART -
BMS cage plates 20-pack
$200.00 6x6x6 3/8" cage plates 20-packADD TO CART -
BMS Camry 7 Gal. Tank
$365.00 7 gallon stainless fuel tank with baffleADD TO CART -
BMS Camry Flex Motor Mount
$125.00 Take your demolition derby game to the next level with the BMS Camry Flex Motor Mount – exclusively available at DERBYPARTS.com. Designed and built by Brian’s Machine Shop, this front motor mount is engineered specifically for Toyota Camry 4-cylinder models (V6 not available at this time).ADD TO CART -
BMS Camry Front Rail Plates 1/4″
$110.00 camry front rail reinforcement plates (pair) 1/4" steelADD TO CART -
BMS Camry Motor Mount
$90.00 Solid Camry front engine mount 98-2001ADD TO CART -
BMS Camry Oval Pump Tank 6.5 Gallon
$365.00 6.5 gallon stainless oval style camry fuel pump 97 and older (pump not included)ADD TO CART -
BMS Camry Shifter Bracket
$36.75 Brians machine shop Bms camry shifter bracket 4 cylinder demo derbyADD TO CART -
BMS Century 14″ Lip Rings
$65.00 bead lip protectors for century wheelsADD TO CART -
BMS Chevy / Ford Full Center Pair
$95.00 Chevy 5/8 studs Ford1/2 studs Pattern full wheel center Choose 14", 15", Nissan or SS rimSelect options -
BMS Chevy HEI Distributor Clamp
$35.00 brians machine shop distributor cap clamp with hardwareADD TO CART -
BMS Chevy LS Engine cradle
$625.00 this cradle is designed to keep your engine securely mounted, even through the most extreme impacts and rough rides on the derby track.ADD TO CART -
BMS CHEVY Shifter Bracket
$36.75 brians machine shop chevy shifter bracketADD TO CART -
BMS Chevy to Ford Motor Mounts
$105.00 Brians Machine Shop Chevy to Ford motor mounts. Chevy Motor to Ford Crown Vic Frame. Engine Mounts 1/4" Thick. Comes as a complete set (left and right side)Select options -
BMS Chrysler pointy replica
$600.00 build your own pointy replica bumper with this kitSelect options -
BMS Clutch Fan Eliminator SBC
$47.00 clutch fan eliminator for ranger fansADD TO CART -
BMS Compact 5 Lug metric Small Wheel Center pair
$35.00 small multilug wheel center metricADD TO CART -
BMS Compact Multi 4 Lug metric Center 2 pack
$35.00 designed to strengthen small metric wheels where it matters most. Precision-cut from ¼" thick steel 4 lug metric 2 packADD TO CART -
BMS Compact Offset Centers Pair
$75.00 Brians Machine Shop BMS Compact Offset Centers – 3" Offset Multilug Wheel Centers (Pair) Maximize your wheel performance with the Brians Machine Shop (BMS) Compact Offset Centers. Designed for versatility and durability, these 3-inch offset wheel centers fit a wide range of applications, providing the perfect solution for derby cars that need reliable, strong, and adaptable wheel components.ADD TO CART -
BMS Complete Shifter Kit
$220.00 Brians Machine Shop complete demo derby shifterADD TO CART This product has multiple variants. The options may be chosen on the product page -
BMS Double Battery Box
$155.00 ADD TO CART -
BMS Flat Motor Mounts
$105.00 Brians Machine Shop BMS Flat Motor Mounts – Chevy (Demolition Derby) Upgrade your derby car’s engine setup with the Brians Machine Shop (BMS) Flat Motor Mounts, designed specifically for Chevy vehicles in demolition derby use. These high-performance motor mounts are built to withstand the toughest impacts while providing solid engine stability, keeping your motor in place no matter the chaos on the track.ADD TO CART -
BMS Ford 2.3 Lower Cradle
$225.00 2.3 cradle 3/8" thickADD TO CART -
BMS FUEL LINE KIT
$100.00 Fuel Line Kit for demo derby carsADD TO CART -
BMS Fuel Pump Kit
$450.00 Choose Holley Sniper 7psi or Holley Red 7psi PumpSelect options -
BMS Gas Brake Combo
$468.00 comes with cable and rod ends (throttle bracket available)ADD TO CART -
BMS Gas pedal
$241.50 Each pedal includes an 8-foot throttle cable and rod ends, giving you the flexibility to route and adapt it to a wide variety of engine and chassis setups.ADD TO CART -
BMS Hat
$32.00 richardson 112 snapback hat choose colorSelect options -
BMS HD 4cyl Camry Trans bracket
$45.00 Heavy Duty Camry Shifter BracketADD TO CART -
BMS Header Caps
$36.75 Header Caps 1/8 thick 4 “round (sold as a Pair)ADD TO CART -
BMS Header Protector Mount
$30.00 weld on header protector bracketADD TO CART -
BMS Header Protector V8
$158.00 Brians Machine Shop BMS header protector V8. Sold as a pair, 1/4" thick steel.ADD TO CART -
Sale!
BMS Header Protectors with Mounts
Original price was: $188.00.$150.00Current price is: $150.00. fits V8 or V6 header protector kit with header protector mounting tabs.Select options -
BMS Holley 4412 Carb Bracket
$40.00 fits Holley 4412 carbsADD TO CART -
BMS Hump Plates 22x6x1/4
$130.00 demo derby hump plate pair 1/4" thick steelADD TO CART -
BMS Hump Plates 4x22x1/4
$85.00 1/4"x22"x4" steel rear hump plates (SOLD AS A PAIR)ADD TO CART -
BMS Motor Mount Bushings
$31.50 designed to fit all Brian’s Machine Shop motor mounts, ensuring a precise, durable fit for your derby engine setup.ADD TO CART -
BMS Multilug Full Center 3/8″ thick PAIR
$95.00 Brians Machine Shop Full Center all 1/2'' studs Choose Wheel Type 15", 14", SS and NissanSelect options -
BMS Multilug Small Wheel Center Pair
$40.00 multilug small center choose between 1/4" and 3/8" thick steelSelect options -
BMS Narrowed Chrome SS Wheels (pair)
$425.00 pair of narrowed Chrome SS wheels with multilug centerADD TO CART -
BMS Nissan Wheels Big Chevy/Small Ford (PAIR)
$400.00 pair of chrome nissan derby wheels. with 3/8" dual pattern big chevy/small fordADD TO CART -
BMS Oversized Box Ford Spindle Nuts
$70.00 These oversized nuts provide increased surface area and strength compared to factory hardware, helping prevent rounding, loosening, or failure under extreme derby conditions.ADD TO CART -
BMS Radiator Protector
$150.00 Brians Machine Shop Radiator Protector 19" tall x 38" wide (1/4" Thick steel).ADD TO CART -
BMS Rear Bumper Brackets
$52.50 set the your bumper tilt with this 4 pack of bracketsADD TO CART -
BMS Rearend Ear Brackets
$75.00 Brians Machine Shop BMS Rearend Ear Brackets – Universal Fit (Pair) Strengthen your rear axle setup with the Brians Machine Shop (BMS) Rearend Ear Brackets, designed for durability and performance in demolition derby cars. These heavy-duty, universal fit brackets are crafted from 1/2” thick steel, providing the perfect solution to reinforce your rear end and ensure maximum durability under the intense impacts of derby action.ADD TO CART -
BMS Right Brake Pedal
$241.50 Speedway master cylinder (Wilwood-style) paired with a rugged steel pedal designed to survive hard hits, vibration, and extreme derby conditionsADD TO CART -
BMS SBC 1/2″ Headplate Cradle
$775.00 for small block Chevrolet engines used in demolition derbyADD TO CART -
BMS SBC 1/4″ economy cradle
$315.00 fits small block chevy engines, 1,4" thick steel with 1/2" earsADD TO CART -
BMS SBC Half Halo
$265.00 Fits Brians Machine Shop Small Block Chevy Lower Head Plate CradleADD TO CART -
BMS Shocker Hood Washer (4 pack)
$36.75 These high-quality washers are designed to securely hold down your hood while providing the durability and strength needed for the intense impacts of demo derby racingADD TO CART -
BMS Single Battery Box
$85.00 fits group 31 (semi battery)ADD TO CART -
BMS Sky-High DIY Column Mount
$42.00 DIY Sky High Steering mountADD TO CART -
BMS Sky-High Steering Column Mount
$100.00 Constructed from 3" x 3" x 1/4" square tubing and fully welded, this mount provides a rock-solid foundation for sky-high steering setupsADD TO CART -
BMS Small Block Chevy Mid Plate
$200.00 small block chevy mid plate 1/2" steelADD TO CART -
BMS T-1 Camry Front Rail Plates (pair)
$200.00 T-1 Steel 1/4" thick Camry inner frame rail plates (pair)ADD TO CART -
BMS TH400 Trans Brace Kit
$675.00 complete turbo 400 transmission brace kit. (FOR STEEL BELLS)ADD TO CART -
BMS Throttle Bracket SBC
$38.00 fits sbc engines (does not fit chevy vortec)ADD TO CART -
BMS V6 Header Protector
$157.50O
ADD TO CART -
BMS Wbody Shifter Bracket
$36.75 designed for durability, precision, and reliability in demo derby environments. This kit includes everything you need to optimize your shifter setup, featuring a transmission bracket, gear selector/shifter tab, and two 1/4" heims for smooth and secure shifting performance under intense race conditions.ADD TO CART